Washington State University World Class. Face to Face. Campuses WSU Home WSU Search my WSU

Testing procedure

From wsuwiki

Revision as of 15:26, 27 March 2007 by Yen chia huang (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Each group has different specimen to test, basically each group should follow the standard testing procedure on ASME. Ambient Temperature, Barometric Pressure or other condition factors might effect the result of the test must be included in the testing procedure.

A test director must be assigned to take care the test. Leave a blank space for test director to put his/her check mark after each procedure. Remember, each group should clean up the mess after the test is done.

Retrieved from "http://wiki.wsu.edu/wsuwiki/Testing_procedure"
Personal tools